# Bad batch of resin?

**URL:** https://forum.formlabs.com/t/bad-batch-of-resin/28121
**Category:** Form 3/3+
**Created:** [July 1, 2020, 3:47pm UTC](https://forum.formlabs.com/t/bad-batch-of-resin/28121 "2020-07-01T15:47:01Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![nsayer](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/nsayer/32/14255_2.png) [@nsayer](https://forum.formlabs.com/u/nsayer)
#### Post date: [July 1, 2020, 3:47pm UTC](https://forum.formlabs.com/t/bad-batch-of-resin/28121/1 "2020-07-01T15:47:01Z")

</div>

More or less since the beginning. I’ve gotten results from my Form 3 that are nominal for the most part. I’ve had an 83% print success over 9 months.

Lately, however, prints with white have been failing at an alarming rate. Here’s an example.

 ![IMG_3127](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/2/f/2f30c5356b3c319f4b1bafe66829cf45548ac3d4.jpeg)

This is characteristic across more than one firmware version, but I feel like it started with what is now the previous resin cartridge.

Is there a precedent for getting a bad batch of resin?