# BabyForm2: 3D Print Your 3D Printer

**URL:** https://forum.formlabs.com/t/babyform2-3d-print-your-3d-printer/13823
**Category:** Projects & Prints
**Created:** [June 21, 2017, 9:33am UTC](https://forum.formlabs.com/t/babyform2-3d-print-your-3d-printer/13823 "2017-06-21T09:33:53Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![rkagerer](https://avatars.discourse-cdn.com/v4/letter/r/439d5e/32.png) [@rkagerer](https://forum.formlabs.com/u/rkagerer)
#### Post date: [June 21, 2017, 9:34am UTC](https://forum.formlabs.com/t/babyform2-3d-print-your-3d-printer/13823/2 "2017-06-21T09:34:19Z")

</div>

## TROUBLESHOOTING

Below are some tips if you run into trouble or want to make adjustments.

Before you venture into model edits, be warned this was a frantically rushed design-build begun merely a week out from the conference (and that includes most of the component sourcing!). As a result, some my modeling best practices flew out the window. So if you’re courageous enough to fire this up in Solidworks, please accept my humble apologies for any pain that ensues. (I did start on a clean, redesign-from-scratch in Onshape but never got around to finishing it).

- **Compression compensation**

- **Clearances**

- **Preform Layout**

- **Built-In Jig**

- **LED Viewing Angle**

- **Decal**

- **Disassembly**

- **Modeling**

---

_[View the full topic](https://forum.formlabs.com/t/babyform2-3d-print-your-3d-printer/13823)._