# Ayuda con tanque de resina 

**URL:** <https://forum.formlabs.com/t/ayuda-con-tanque-de-resina/30422>\
**Category:** Form 2\
**Created:** [March 1, 2021, 4:33pm UTC](https://forum.formlabs.com/t/ayuda-con-tanque-de-resina/30422 "2021-03-01T16:33:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Centerdent](https://avatars.discourse-cdn.com/v4/letter/c/ac91a4/32.png) [@Centerdent](https://forum.formlabs.com/u/Centerdent)\
**Post date:** [March 1, 2021, 4:33pm UTC](https://forum.formlabs.com/t/ayuda-con-tanque-de-resina/30422/1 "2021-03-01T16:33:04Z")

</div>

Hola estoy presentando una falla con un tanque de resina nuevo, la impresora no lo quiere reconocer, si alguien podría ayudarme como reiniciarlo para reinstalarlo o algo

---

<div class="post-metadata">

**Author:** ![rybu](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/rybu/32/14917_2.png) [@rybu](https://forum.formlabs.com/u/rybu)\
**Post date:** [March 1, 2021, 7:25pm UTC](https://forum.formlabs.com/t/ayuda-con-tanque-de-resina/30422/2 "2021-03-01T19:25:42Z")

</div>

There’s a little RFID tag/chip on the tank. Does it look damaged, missing, or perhaps out of place? Likely the printer is having a hard time detecting it, and that’s your problem.