# Article on how we use 3D Printing (including our Form1) for Film/TV FX work

**URL:** <https://forum.formlabs.com/t/article-on-how-we-use-3d-printing-including-our-form1-for-film-tv-fx-work/1042>\
**Category:** General Discussion\
**Created:** [April 3, 2014, 7:01pm UTC](https://forum.formlabs.com/t/article-on-how-we-use-3d-printing-including-our-form1-for-film-tv-fx-work/1042 "2014-04-03T19:01:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![NewDealStudiosI](https://avatars.discourse-cdn.com/v4/letter/n/e79b87/32.png) [@NewDealStudiosI](https://forum.formlabs.com/u/NewDealStudiosI)\
**Post date:** [April 3, 2014, 7:01pm UTC](https://forum.formlabs.com/t/article-on-how-we-use-3d-printing-including-our-form1-for-film-tv-fx-work/1042/1 "2014-04-03T19:01:49Z")

</div>

We are the middle section

[http://www.fxguide.com/featured/special-effects-making-rain-3d-printing-blow-up-greenscreens/](http://www.fxguide.com/featured/special-effects-making-rain-3d-printing-blow-up-greenscreens/)

We will probably have another bigger article on our use of the Form1 on the upcoming Nolan film, ‘Interstellar’ where we did ALL the 3D printing on desktop printers including the Form1