# Are large prints possible using Castable Wax?

**URL:** <https://forum.formlabs.com/t/are-large-prints-possible-using-castable-wax/24739>\
**Category:** Support & Troubleshooting\
**Created:** [September 18, 2019, 5:52pm UTC](https://forum.formlabs.com/t/are-large-prints-possible-using-castable-wax/24739 "2019-09-18T17:52:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mark\_Eberle](https://avatars.discourse-cdn.com/v4/letter/m/3be4f8/32.png) [@Mark\_Eberle](https://forum.formlabs.com/u/Mark_Eberle)\
**Post date:** [September 18, 2019, 5:52pm UTC](https://forum.formlabs.com/t/are-large-prints-possible-using-castable-wax/24739/1 "2019-09-18T17:52:47Z")

</div>

Are large prints possible using Castable Wax? Has anyone had success. I asked Formlabs and they said yes, but I’m doubtful. In another post, someone said they were unsuccessful.

I really don’t want to spend $400 dollars to test it, only to find it’s not possible.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex025/uploads/formlabs/original/3X/5/b/5bc2bdf993ff27c2e0eecab5010b25626fbb327a.png) [@system](https://forum.formlabs.com/u/system)\
**Post date:** [October 2, 2019, 5:56pm UTC](https://forum.formlabs.com/t/are-large-prints-possible-using-castable-wax/24739/2 "2019-10-02T17:56:11Z")

</div>

Closed on October 2, 2019, 5:56pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.