# Arc Reactor prop build **URL:** \ **Category:** Projects & Prints\ **Created:** [March 20, 2015, 8:38pm UTC](https://forum.formlabs.com/t/arc-reactor-prop-build/4004 "2015-03-20T20:38:00Z")\ **Posts on this page:** 1\ **Showing post:** 54
**Author:** ![MarkLoit](https://avatars.discourse-cdn.com/v4/letter/m/ea5d25/32.png) [@MarkLoit](https://forum.formlabs.com/u/MarkLoit)\ **Post date:** [June 18, 2015, 3:28pm UTC](https://forum.formlabs.com/t/arc-reactor-prop-build/4004/54 "2015-06-18T15:28:17Z")
Looks awesome! Any chance you’d be willing to share your solidworks models? I wouldn’t mind trying to make one, but modifying it slightly for my own electronics. Also the “skins” you mentioned a while back, are likely leftovers from a previously failed print. Or the “invisible jello” (partially cured resin) that forms adjacent to the cured resin, especially when printing undercuts. Consider printing one of the following, and sweeping your tank after each print. > [@Handy resin tank strainer](http://forum.formlabs.com/t/handy-resin-tank-strainer/40): > > Over time small bits of cured resin can accumulate in your resin tank - lots of things can cause this ranging from from canceling a print midway through to being a bit too ambitious and trying to print a model with a full head of hair. Regardless of how it got there, it needs to be removed for optimum print quality. In order to do this I have designed a tank strainer that can be printed on your Form 1. The strainer comes in two pieces - a handle and strainer. Print both parts on your Form 1 the… > [@Comb designed for cleaning the resin tank](http://forum.formlabs.com/t/comb-designed-for-cleaning-the-resin-tank/4031/32): > > Well Michael, sometimes sharing something for free will bring you something in the end? That said, I would like to share something of my own. I tried to print your resin tank comb, but since I am a newbie in printing on the Form 1+, the print failed. Some of the teeth cracked, because they are relatively thin, with little support. So I decided to draw my own version of the resin tank comb. It’s based on your idea, so all the kudo’s go to you! smile Here is my design (in Rhino): [image] I d… --- _[View the full topic](https://forum.formlabs.com/t/arc-reactor-prop-build/4004)._