# Adhesive Problems

**URL:** <https://forum.formlabs.com/t/adhesive-problems/10319>\
**Category:** Form 2\
**Created:** [November 3, 2016, 7:15pm UTC](https://forum.formlabs.com/t/adhesive-problems/10319 "2016-11-03T19:15:54Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![kevinduhe](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/kevinduhe/32/7999_2.png) [@kevinduhe](https://forum.formlabs.com/u/kevinduhe)\
**Post date:** [November 3, 2016, 10:22pm UTC](https://forum.formlabs.com/t/adhesive-problems/10319/3 "2016-11-03T22:22:02Z")

</div>

I had this happen to me once, even more dramatically (see link below). Oddly enough the part came out fine (it was a very large part). I adjusted the Z-axis down and it hasn’t happened again since.

> [@Odd deformation in build structure](http://forum.formlabs.com/t/odd-deformation-in-build-structure/9664):
>
> So I came in this morning to an odd deformation in a print this morning. Rather than rattle on about it, I think pics will speak more concisely than I can describe it. Also please note that the item itself came out 100% perfect. What would cause this?

Hope this helps.

- Kevin

---

_[View the full topic](https://forum.formlabs.com/t/adhesive-problems/10319)._
