# Add Full Color Patterns to 3D Prints with Computational Hydrographics **URL:** \ **Category:** Experimental\ **Created:** [February 21, 2017, 4:49pm UTC](https://forum.formlabs.com/t/add-full-color-patterns-to-3d-prints-with-computational-hydrographics/11996 "2017-02-21T16:49:42Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![amos](https://avatars.discourse-cdn.com/v4/letter/a/ebca7d/32.png) [@amos](https://forum.formlabs.com/u/amos)\ **Post date:** [February 21, 2017, 4:49pm UTC](https://forum.formlabs.com/t/add-full-color-patterns-to-3d-prints-with-computational-hydrographics/11996/1 "2017-02-21T16:49:42Z")
[![](https://formlabs.com/media/upload/hydro_edit4.jpg) ](https://formlabs.com/media/upload/hydro_edit4.jpg) We just just published a short blog tutorial on [using hydrographic dipping to color prints](https://formlabs.com/blog/full-color-pattern-3d-prints-computational-hydrographics/) with digital graphics. A lot of 3D models have color maps, and the potential to color 3D prints automatically is very exciting. There’s a lot more to learn about how to make successful hydrographic printed parts - this is just a start, and far from perfect. We’d love to see your results if you experiment and improve on this process! Here are a few more resources to get you started: 1. [Detailed instructions and source for hydrographic printing paper](http://www.prostreetgraphix.com/instructions/) 2. [Tutorial for UV mapping (coloring 3D models with an image texture)](http://www.chocofur.com/5-uv-mapping.html) 3. [OpenFL](https://github.com/Formlabs/OpenFL) (Form 1+ users can use this to drive the Z stage of their printer) ---
**Author:** ![Loenco](https://avatars.discourse-cdn.com/v4/letter/l/2bfe46/32.png) [@Loenco](https://forum.formlabs.com/u/Loenco)\ **Post date:** [October 3, 2019, 3:47pm UTC](https://forum.formlabs.com/t/add-full-color-patterns-to-3d-prints-with-computational-hydrographics/11996/2 "2019-10-03T15:47:08Z")
Hi I’m new here but am interested in replicating this project. Trouble is I’m also new to Blender and have been trying to learn enough to follow. It would be great if the Blender Workflow section could be elaborated on for newbies like me, maybe with screen shots to show what windows/views to be in at each point and even with an example of how I would load my own collision and film objects. I don’t even get whether the workflow given is what to do if I use the supplied .blend file or what to do without the .blend file! I’d be grateful for any guidance. Many thanks ---
**Author:** ![rkagerer](https://avatars.discourse-cdn.com/v4/letter/r/439d5e/32.png) [@rkagerer](https://forum.formlabs.com/u/rkagerer)\ **Post date:** [October 3, 2019, 6:39pm UTC](https://forum.formlabs.com/t/add-full-color-patterns-to-3d-prints-with-computational-hydrographics/11996/3 "2019-10-03T18:39:44Z")
Great work! At the end of the article you mention: > [@](#): > > The biggest challenge we saw is aligning the model with the film, which is prone to shifting and rotating slightly. Our setup isn’t perfect - if the model could be translated in X and Y relative to the tank, and even rotated, it would be possible to get better registration every time. A hydrographic tank built into a CoreXY cartesian printer would be great for controlling and adjusting registration. Could you use the peel motor to adjust the tank’s X location in your jury-rigged Form 2? (Or tilt in a Form 1 + OpenFL to shift the film around?). Would moving that much mass create too much surface ripple? If it worked, that would leave just one dimension of adjustment required in either your gantry or tank holder. Are you envisioning X/Y tweaking (e.g. in a CoreXY printer) would be done manually or by some kind of optical feedback as in Zheng’s experiment? Could we get some more photos of other attempts? I know spraying the activator causes some fading and would like to know how brilliant you can get the colors to be. Also curious if anyone here has ever tried to create any sort of “robot airbrush” for texturing 3D prints. ---
**Author:** ![alan1950](https://avatars.discourse-cdn.com/v4/letter/a/6de8d8/32.png) [@alan1950](https://forum.formlabs.com/u/alan1950)\ **Post date:** [August 22, 2021, 10:02pm UTC](https://forum.formlabs.com/t/add-full-color-patterns-to-3d-prints-with-computational-hydrographics/11996/4 "2021-08-22T22:02:12Z")
WOW a use for my FormLabs 2 that I was ready to toss. Since I’m using the FL3 exclusively. I know this conversation is 2 years old but then I was USING the FL2. Any updates? ---
**Author:** ![Noah3](https://avatars.discourse-cdn.com/v4/letter/n/87869e/32.png) [@Noah3](https://forum.formlabs.com/u/Noah3)\ **Post date:** [December 22, 2022, 9:52am UTC](https://forum.formlabs.com/t/add-full-color-patterns-to-3d-prints-with-computational-hydrographics/11996/5 "2022-12-22T09:52:06Z")
did you manage do it ? ---
**Author:** ![Loenco](https://avatars.discourse-cdn.com/v4/letter/l/2bfe46/32.png) [@Loenco](https://forum.formlabs.com/u/Loenco)\ **Post date:** [August 14, 2023, 1:03pm UTC](https://forum.formlabs.com/t/add-full-color-patterns-to-3d-prints-with-computational-hydrographics/11996/6 "2023-08-14T13:03:22Z")
Unfortunately not, the Blender instructions didn’t work for me. ---
**Author:** ![anime3d](https://avatars.discourse-cdn.com/v4/letter/a/f6c823/32.png) [@anime3d](https://forum.formlabs.com/u/anime3d)\ **Post date:** [May 24, 2024, 12:00pm UTC](https://forum.formlabs.com/t/add-full-color-patterns-to-3d-prints-with-computational-hydrographics/11996/7 "2024-05-24T12:00:59Z")
Working with this is great!