# 3rd Party PhotoCentric Resin

**URL:** <https://forum.formlabs.com/t/3rd-party-photocentric-resin/9270>\
**Category:** Projects & Prints\
**Created:** [August 13, 2016, 3:09pm UTC](https://forum.formlabs.com/t/3rd-party-photocentric-resin/9270 "2016-08-13T15:09:22Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Teamanimal](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/teamanimal/32/6477_2.png) [@Teamanimal](https://forum.formlabs.com/u/Teamanimal)\
**Post date:** [December 13, 2016, 9:13pm UTC](https://forum.formlabs.com/t/3rd-party-photocentric-resin/9270/7 "2016-12-13T21:13:52Z")

</div>

> [@Photocentric3D retailer in the USA?](http://forum.formlabs.com/t/photocentric3d-retailer-in-the-usa/8788/74):
>
> Sorry for not replying sooner! It’s printer on a Form2, at 50 micron layer height. The model is approx. 2" long by 1.5" tall without the horns, with the horns, its closer to 3" x 2"

Take a look at this tread.

Thanks to the genius that is Silvio\_Augusto, we have a custom settings that works with photosentric3d grey hard and firm.

---

_[View the full topic](https://forum.formlabs.com/t/3rd-party-photocentric-resin/9270)._