# 3BL Rigid 10K

**URL:** <https://forum.formlabs.com/t/3bl-rigid-10k/37871>\
**Category:** Form 3L\
**Created:** [March 7, 2024, 11:08am UTC](https://forum.formlabs.com/t/3bl-rigid-10k/37871 "2024-03-07T11:08:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![cumminsa](https://avatars.discourse-cdn.com/v4/letter/c/8e8cbc/32.png) [@cumminsa](https://forum.formlabs.com/u/cumminsa)\
**Post date:** [March 7, 2024, 11:08am UTC](https://forum.formlabs.com/t/3bl-rigid-10k/37871/1 "2024-03-07T11:08:41Z")

</div>

This stuff is tearing up the resin tank. It is also dropping large prints off the platform I assume because the membrane is so floppy and comes up to high. It prints the raft just fine and this it gets stuck to the membrane. THis is very frustrating as I dont know whether the resin tank is defective or the resin is

---

<div class="post-metadata">

**Author:** ![henryqiu](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.formlabs.com/henryqiu/32/21840_2.png) [@henryqiu](https://forum.formlabs.com/u/henryqiu)\
**Post date:** [March 25, 2024, 5:17pm UTC](https://forum.formlabs.com/t/3bl-rigid-10k/37871/2 "2024-03-25T17:17:48Z")

</div>

Hi, sorry to hear you’re having trouble printing with Rigid 10k, can you please submit a ticket [here](https://support.formlabs.com/s/contact-support?language=en_US) and we’ll look into how to best help you?