# 28mm & 56mm tabletop miniature print quality

**URL:** <https://forum.formlabs.com/t/28mm-56mm-tabletop-miniature-print-quality/18845>\
**Category:** General Discussion\
**Created:** [May 19, 2018, 3:37pm UTC](https://forum.formlabs.com/t/28mm-56mm-tabletop-miniature-print-quality/18845 "2018-05-19T15:37:23Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![JohnHue](https://avatars.discourse-cdn.com/v4/letter/j/48db29/32.png) [@JohnHue](https://forum.formlabs.com/u/JohnHue)\
**Post date:** [May 19, 2018, 5:37pm UTC](https://forum.formlabs.com/t/28mm-56mm-tabletop-miniature-print-quality/18845/2 "2018-05-19T17:37:58Z")

</div>

I think this will answer some questions :

> [@Warhammer 40K Imperial knight Paladin](http://forum.formlabs.com/t/warhammer-40k-imperial-knight-paladin/10993/46):
>
> I bought a display case for it, it’s actually a football display case. It’s octogonal, made of real glass, with a wood base, and mirrors on the back 3 panes as well as the bottom. The only problem is that it being glass, the seam between panes is somewhat distracting, but other than that, it’s pretty cool. Anyway, I printed and painted a couple of UltraMarines, added some grass and rocks to the bottom mirror, and completed my mini diorama. And here it is under the glass

Grey resin is the most indicated for that kind of work, although it will yield parts that are a bit brittle, much more so than an injection molded part.

---

_[View the full topic](https://forum.formlabs.com/t/28mm-56mm-tabletop-miniature-print-quality/18845)._